top of page

Penobscott River Trade Route

Public·86 members

How to Fix Winload.efi Error and Install Windows 7 on a GPT Disk with UEFI Mode


Download Windows 7 Bootmgr Efi For 32 Bit.53 16


## Introduction If you want to install Windows 7 on a modern PC with a GPT disk, you may encounter some challenges. One of them is that you need a special file called Windows 7 Bootmgr Efi to boot from a USB stick in UEFI mode. Without this file, you may get an error message saying that winload.efi file is missing or corrupted.




Download Windows 7 Bootmgr Efi For 32 Bit.53 16

  • In this article, I'm going to show you how to download and install Windows 7 Bootmgr Efi for 32 bit.53 16 on your PC. This will allow you to boot Windows 7 from a USB stick in UEFI mode and install it on a GPT disk. You will need a USB stick with at least 8 GB of space, a Windows 7 ISO file, and a tool called Rufus.Here is an overview of the steps you need to follow:Prepare a USB stick with Rufus

  • Copy the EFI files to the USB stick

  • Boot from the USB stick in UEFI mode

  • Install Windows 7 on the GPT disk

## Step 1: Prepare a USB stick with Rufus Step 1: Prepare a USB stick with Rufus


  • Rufus is a free and portable tool that can create bootable USB drives for various operating systems. It can also format your USB stick with GPT and FAT32, which are required for UEFI booting. You can download Rufus from its official website: https://rufus.ie/After downloading Rufus, run it and plug in your USB stick. You should see something like this:To create a bootable USB stick with Windows 7 Bootmgr Efi for 32 bit.53 16, you need to follow these settings:Device: Select your USB stick from the drop-down menu.

  • Boot selection: Click on SELECT and browse to your Windows 7 ISO file.

  • Image option: Choose Standard Windows installation.

  • Partition scheme: Choose GPT.

  • Target system: Choose UEFI (non CSM).

  • File system: Choose FAT32.

  • Cluster size: Choose Default.

  • Volume label: You can name your USB stick as you like.

  • Check the boxes for Quick format, Create extended label and icon files, and Check device for bad blocks (1 pass).

  • Click on START.

Rufus will warn you that all data on your USB stick will be erased. Click OK to confirm and wait for Rufus to finish creating your bootable USB stick. ## Step 2: Copy the EFI files to the USB stick Step 2: Copy the EFI files to the USB stick


  • After Rufus has completed its task, you need to copy some EFI files from your Windows 7 ISO file to your USB stick. These files are needed for UEFI booting and are not included in Rufus.To copy these files, you need to mount your Windows 7 ISO file as a virtual drive. You can use any tool that can do this, such as WinCDEmu or Virtual CloneDrive. Alternatively, you can extract your Windows 7 ISO file using tools like WinRAR or 7-Zip.Once you have mounted or extracted your Windows 7 ISO file, open it and navigate to \sources folder. There you will find two files: boot.wim and install.wim. These are compressed image files that contain all the files needed for Windows installation.You need to extract these files using tools like WinRAR or 7-Zip. Right-click on each file and choose Extract here or Extract files... You will get two folders: boot and install.Now open your USB stick in another window and navigate to \EFI folder. There you will see another folder called BOOT. Open it and delete all its contents.Next, go back to your extracted boot folder and copy these files:\windows\boot\efi\bootmgfw.efi

  • \windows\boot\efi\bootmgr.efi

  • Paste them into \EFI\BOOT folder on your USB stick.Then go back to your extracted install folder and copy these files:\windows\boot\efi\bootmgfw.efi.mui

  • \windows\boot\efi\bootmgr.efi.mui

  • Paste them into \EFI\BOOT\en-US folder on your USB stick.Finally, rename these files on your USB stick:bootmgfw.efi -> bootx64.efi

  • bootmgr.efi -> cdboot.efi

Your \EFI\BOOT folder on your USB stick should look like this:You have successfully copied all the EFI files needed for UEFI booting. ## Step 3: Boot from the USB stick in UEFI mode Step 3: Boot from the USB stick in UEFI mode




Now you are ready to boot from your USB stick in UEFI mode. To do this, you need to access your BIOS settings and enable UEFI boot mode.


The exact steps may vary depending on your PC model and BIOS version, but generally you need to do the following: - Restart your PC and press the manufacturer's key to open the BIOS menus. Common keys are Esc, Delete, F1, F2, F10, F11, or F12. You can also check your manufacturer's website for more information. - Look for the option to enable UEFI boot mode or disable legacy BIOS mode. This may be under a tab like Boot, System Configuration, or Security. You may also need to disable Secure Boot or enable Compatibility Support Module (CSM) depending on your PC model and BIOS version. - Save the changes and exit the BIOS menus. Your PC will reboot and you will see a screen like this: ![UEFI boot menu screenshot](https://i.imgur.com/7w0QZ8o.png) Here you need to select the option that says UEFI: USB Drive or something similar. This will boot from your USB stick in UEFI mode and launch the Windows 7 setup screen. ## Step 4: Install Windows 7 on the GPT disk Now you are ready to install Windows 7 on your GPT disk. To do this, you need to follow these steps: - On the Windows 7 setup screen, choose your language, time and currency format, and keyboard or input method. Click Next. - Click Install now. - Accept the license terms and click Next. - Choose Custom (advanced) as the installation type. - You will see a list of partitions on your disk. If you have an existing Windows installation or other data on your disk, you need to delete all the partitions first. To do this, select each partition and click Delete. You will get a warning message saying that all data on the partition will be lost. Click OK to confirm. - After deleting all the partitions, you will see a single unallocated space on your disk. Click New and enter the size of the partition you want to create for Windows 7. The recommended size is at least 20 GB. Click Apply. - You will get a message saying that Windows might create additional partitions for system files. Click OK to accept. - You will see four partitions created by Windows: a System Reserved partition, an MSR (Microsoft Reserved) partition, an EFI System partition, and a Primary partition. These are all necessary for UEFI booting and GPT disk support. - Select the Primary partition (the largest one) and click Next. - Windows 7 will start copying files and installing features and updates. This may take some time depending on your PC speed and USB stick performance. - After the installation is complete, your PC will restart and boot into Windows 7 in UEFI mode. ## Conclusion You have successfully downloaded and installed Windows 7 Bootmgr Efi for 32 bit.53 16 on your PC with a GPT disk. This will allow you to enjoy the benefits of UEFI booting, such as improved security, faster boot times, large capacity hard drive support, and more. Here are some tips and warnings you should keep in mind: - Make sure you have a backup of your important data before installing Windows 7 on a GPT disk. All data on your disk will be erased during the installation process. - Make sure you have a valid product key for Windows 7 activation. You can find it on a sticker on your PC case or in your purchase confirmation email. - Make sure you have the latest drivers for your hardware devices after installing Windows 7. You can download them from your manufacturer's website or use a tool like Driver Booster to update them automatically. - Make sure you have the latest updates for Windows 7 after installing it. You can check for updates manually by going to Control Panel > System and Security > Windows Update or use a tool like WSUS Offline Update to download them offline. If you have any questions or feedback about this article, please feel free to leave a comment below. I hope you found this article helpful and informative. ## FAQs Q: What is the difference between BIOS and UEFI? A: BIOS (Basic Input Output System) is an old firmware that initializes and configures hardware devices during the boot process. UEFI (Unified Extensible Firmware Interface) is a newer firmware that replaces BIOS with more features and capabilities. Q: What is the difference between MBR and GPT? A: MBR (Master Boot Record) is an old partitioning scheme that supports up to four primary partitions with a maximum size of 2 TB each. GPT (GUID Partition Table) is a newer partitioning scheme that supports up to 128 primary partitions with no size limit. Q: What is the difference between bootx64.efi and bootmgr.efi? A: bootx64.efi is the default bootloader file for UEFI booting on 64-bit systems. bootmgr.efi is an alternative bootloader file that can be used for UEFI booting on some systems. Q: How can I switch from BIOS mode to UEFI mode or vice versa? A: You can use a tool called MBR2GPT to convert your disk from MBR to GPT or vice versa without losing data. However, this tool only works on Windows 10 version 1703 or later. Q: How can I check if I'm booting in UEFI mode or BIOS mode? A: You can use a tool like MSInfo32 or System Information to check your firmware mode. Alternatively, you can open Disk Management and check if you have an EFI System partition on your disk. If you do, then you are booting in UEFI mode.


About

Welcome to the group! You can connect with other members, ge...
1.png
bottom of page